照下面的介绍跳线,当32g硬盘用 |
|
精华序号:227
来自论坛:小熊在线 《板卡论坛》
内容说明:(Master with AC Jumper)
The jumper over the DS pins is configuring the drive as a Master.
Th
- ◎ help(168字) xinguo (241621)于2002/10/06(22:11:44)..
先生您好:
我的主板是华硕tx97-Le,新升级的bios版本号是01121le,
为的是识别我新买的硬盘maxtor d740x-6L,不幸的是无论是怎样设
(MASTER, SLAVE)即使在CMOS里设成NONE,总是开机自检到硬盘处就通不过.
也无法进到软驱,硬盘在别的电脑上正常,无法更换.我想可能是硬盘太新,BIOS太老.我实在是不忍心换这主板,他陪伴我4年多从未出故障.有无好办法,谢谢.
- ◎ 很不好意思,你的硬盘只能当成32GB用了。(30字) 丧家的比尔盖茨的乏走狗 (241714)于2002/10/07(11:29:07)..
我以前也遇到过一块这样的主板,BIOS升级到最新也不行。鬼华硕!
- 用DM试试看咯(空) quitchat (241632)于2002/10/06(22:24:37)..
- 照下面的介绍跳线,当32g硬盘用(112字) spider0283 (241627)于2002/10/06(22:21:34)..
(Master with AC Jumper)
The jumper over the DS pins is configuring the drive as a Master.
The jumper over the AC (Alternate Capacity) pins is limiting the drive's capacity.
http://www.maxtor.com/en/documentation/jumper_settings/style_c.htm
本论坛由小熊在线(www.beareyes.com)joyt制作及维护