大家来讨论双屁III VS 单个的屁4 |
|
精华序号:107
来自论坛:小熊在线 《板卡论坛》
内容说明:大家来讨论双屁III VS 单个的屁4
- 大家来讨论双屁III VS 单个的屁4(14字) 双CPU主板 (100919)于2001/08/27(14:47:47)..
大家来讨论双屁III VS 单个的屁4
- 靠,怪老哥我不好,一句话引来了这么多砖头(4字) 双CPU主板 (103211)于2001/09/03(13:44:39)..
哈哈,哈哈
- 精英D6VAA要用什么样的CPU哇?(30字) 被人冒充哇 (103219)于2001/09/03(13:58:17)..
精英D6VAA要用什么样的CPU哇?
精英D6VAA要用什么样的CPU哇?
- 以下学者的帖子中,犯了经验主义的错误。在此作检讨,并更正!(154字) 学者 (102321)于2001/08/31(12:58:03)..
部分PIII支持双Cpu。
因为大家都这么说,所以我动摇了原来的看法。前天找了2块双Cpu的主板,一块是BX板子iWILL的dbd-100,另一块是694的MS-694Dpro。由于2K不支持P@P SMP,即每次换Cpu都要重装系统,所以这个试验我足足做了2个晚上。
我原来犯的错误其实很简单,没有用支持coppermine的转接卡!
下面把情况简单归纳一下:
- ◎ 学者兄,不多说了---佩服你的敬业精神!(空) sensetive (102386)于2001/08/31(17:02:25)..
- 坛子怎么了,贴了几次没有成功:(320字) 学者 (102345)于2001/08/31(13:30:08)..
根据intel的资料,所有cb0内核(0683)或slot 1接口的coppermine可以支持双cpu,而ca2内核(0681)的fc-socket 370的coppermine将不支持双cpu。
从Cpu编号讲,就是sl3x*以后的编号(包括sl4**)的coppermine是cb0内核。
而我以前接触的双cpu主板是slot 1的,而市场上多数coppermine是fc-socket 370的,这就很自然地扯进了转接卡的问题:转接卡支持双coppermine吗?我犯的错误就是这样来的!
实际使用时只要是支持双cpu的转接卡(如我这两天在用的ms6905 master(v2.0)),都能支持双Cpu!完整点讲就是:只要转接卡能支持双COPPERMINE CPU,就能在双CPU主板上实现双CPU系统。而不用管Intel的说法!至于其他品牌的转接卡我没试过,听说Iwill有,如果今天晚上不下雨,我去取回就继续试。
- ◎ 佩服!!!不过我没看明白,是否只要转接卡支持双cpu,用什么编号的cpu都行?(空) moster (102495)于2001/08/31(20:53:23)..
- ◎ 我想要支持双cpu的转接卡!(137字) addor (102389)于2001/08/31(17:07:40)..
我也想在BX的双cpu主板上实现双CPU系统,
但我试过了硕泰克和华硕的CPU转接卡,但不能支持双PIII铜矿CPU系统。
我很感谢您的帖子,但我现在买不到ms-6905 master或者艾威的SlocketII,
不知您能否帮我买到两块ms-6905 master或者艾威的SlocketII!
谢谢!请和我联系:addor@163.net
- 求购艾崴SlocketII转接卡或者MS-6905MASTER转接卡2块! (41字) addor (102404)于2001/08/31(17:30:23)..
求购艾崴SlocketII转接卡或者MS-6905MASTER转接卡2块!
请联系:addor@163.net 谢谢!
- ◎ 转贴自MS,不用重装2000的。(1422字) 阿巧 (102375)于2001/08/31(14:05:08)..
How to Add Support for Multiple Processors in Windows 2000
--------------------------------------------------------------------------------
The information in this article applies to:
Microsoft Windows 2000 Advanced Server
Microsoft Windows 2000 Professional
Microsoft Windows 2000 Server
--------------------------------------------------------------------------------
SUMMARY
Windows 2000 provides support for single or multiple Central Processing Units (CPU); however, if you originally installed Windows 2000 on a computer with a single CPU, the hardware abstraction layer (HAL) on your computer must be updated for your computer to recognize and use multiple CPUs. This article describes how to add support for multiple processors in Windows 2000.
MORE INFORMATION
In Microsoft Windows NT 4.0, you can use the Uptomp.exe tool to add support for multiple CPUs. The Uptomp.exe tool is not used in Windows 2000, instead, you can use Device Manager to make these changes. Note that before you change the computer type, contact your computer manufacturer to determine if there is a vendor-specific HAL that you should use instead of the standard HAL that is included in Windows 2000. To install support for multiple CPUs:
Click Start, point to Settings, point to Control Panel, and then click System.
Click the Hardware tab, and then click Device Manager.
Double-click to expand the Computer branch. Note the type of support that you currently have.
Double-click the computer type that is listed under the Computer branch, click the Drivers tab, click Update Driver, and then click Next.
Click Display a list of known drivers for this device, and then click Show all hardware of this device class.
Click the appropriate computer type (a computer type that matches your current type, except for multiple CPUs), click Next, and then click Finish.
The following table lists and describes each HAL.
HAL Description
---------------------------------------------------------------------------
ACPI MultiProc Use for a multiple-processor ACPI computer
ACPI UniProc Use for a ACPI multiple-processor board but with a
single processor installed
Advanced Use for a single processor motherboard with single
Configuration processor ACPI computer
Power Interface PC
Compaq Systempro Use for a Compaq Systempro computer
MPS Uniprocessor PC Use on non-ACPI computers dual processor motherboard
with a single processor installed
MPS Multiproc PC Non-ACPI computers with a dual processor running
Standard PC Any Standard PC, non-ACPI, or non-MPS. Could be a 386,
486, Pentium, Pentium II, or Pentium III
Standard PC
with C-Step i486
NOTE: You can use this procedure only to upgrade from a single-processor HAL to a multiple-processor HAL. If you use this procedure to change from a standard HAL to an ACPI HAL (for example, after a BIOS upgrade) or vice-versa, unexpected results may occur, including an inability to boot the computer. For additional information how to troubleshoot Windows 2000 HAL issues, click the article number below to view the article in the Microsoft Knowledge Base:
Q237556 Troubleshooting Windows 2000 Hardware Abstraction Layer Issues
- ◎ 格式不清,这里(31字) 阿巧 (102380)于2001/08/31(14:11:46)..
http://support.microsoft.com/support/kb/articles/Q234/5/58.ASP
- 不愧是学者阿(16字) liliwan (102354)于2001/08/31(13:37:37)..
我对你的敬仰又如滔滔江水连绵不绝
- 我对你的敬仰又如滔滔江水连绵不绝
(14字) paker (102359)于2001/08/31(13:42:24)..
这句话怎么这么耳熟那
呵呵
- 而694的MS-694Dpro就根本不存在这个问题,随便插2块同频就可以了。(70字) 学者 (102353)于2001/08/31(13:36:49)..
这个方面我以前倒是知道的:694X内嵌了对Smp的支持。看来Smp不是Intel一家的专利啊,但想不通的是Intel怎么会把利润最大的服务器这块的专利卖给别人。
- ◎ 还是RCC的芯片组配双P被服务器采用的多一些。(27字) sensetive (102391)于2001/08/31(17:09:07)..
不过TYAN也有采用694的S2507,村里有卖的,可惜没有用过。
- 我对你的敬佩由80%增加到90%!(36字) 四海一家 (102329)于2001/08/31(13:13:23)..
你这种强烈的求知欲,敢于承认错误的精神值得我们学习
唉,相见恨晚啊!!
- 学者兄的人品是我们学习的榜样(空) spider0283 (102411)于2001/08/31(17:43:02)..
- 到底是学者,严谨的作风值得大家学习啊——(空) BlazingCD (102327)于2001/08/31(13:10:39)..
- 楼上liliwan兄、四海一家、BlazingCD见笑了。凡事求个真嘛。(空) 学者 (102356)于2001/08/31(13:40:19)..
- ◎ 不愧“学者”这个名字!!!!认识你真是荣幸!(空) sensetive (102387)于2001/08/31(17:04:09)..
- ◎ PIII不支持SMP。(空) 学者 (101268)于2001/08/28(15:26:40)..
- ◎ RCC芯片组上双PIII的也多了啊。(空) sensetive (101639)于2001/08/29(17:05:56)..
- ◎ 恩?PIII支持SMP啊,是PIV不支持。694+双PIII在很多图形站上用啊。(空) sensetive (101638)于2001/08/29(17:03:20)..
- 不是吧?(空) 板卡坛版主 (101553)于2001/08/29(10:46:04)..
- 意外!PIII XEON 至强不但支持!而且支持的很多个!(空) 多菲鸭 (101348)于2001/08/28(18:01:59)..
- PIII XEON 与PIII是两回事啊!(空) 学者 (101514)于2001/08/29(08:02:26)..
- 学者前辈,你错了哦(26字) liliwan (101277)于2001/08/28(15:38:00)..
PIII不支持SMP,那艾威DVD266-R 佰钰双815EP又哪来的呢?
- 双Cpu的815没试过。(空) 学者 (102363)于2001/08/31(13:49:16)..
- 我不知道现在是P41.2G和AND雷鸟1.2G比较,两个谁比较好些!!(5字) 砖瓦 (101602)于2001/08/29(14:59:30)..
要好的!!
- ◎ 恩?PIV1.2G?兄有PIV1.2G?似乎PIV是从1.3起跳的啊。(空) sensetive (101652)于2001/08/29(17:25:49)..
- ◎ 理论上说PIV+RUMBUS性能更高一点,但实际使用中几乎没有针对PIV设计的软件能充分利用那3.2G的带宽,所以如果你不是做专业图形站的话,考虑价格等因素,鸟+DDR更值得你选择。(空) sensetive (101650)于2001/08/29(17:24:18)..
- 主板通过附加芯片支持。(空) 学者 (101279)于2001/08/28(15:38:59)..
- 请问“学者”:BX主板支持双屁III,双菜羊,附加了什么芯片?(空) 双CPU主板 (101533)于2001/08/29(09:12:11)..
- 什么意思(空) liliwan (101285)于2001/08/28(15:45:33)..
- PIII和CII都不支持SMP,双PIII的主板通过附加芯片支持SMP对双CPU进行调度管理,模拟SMP。(空) 学者 (101289)于2001/08/28(15:48:24)..
- ◎ 呵呵,学者兄好。模拟?其实还是PIII处理器本身支持SMP的,PIV不支持,能用这样的办法模拟吗?(空) sensetive (101645)于2001/08/29(17:15:15)..
- 好像是PIII支持,而芯片组不支持(空) liliwan (101301)于2001/08/28(16:10:26)..
- 我也听说是PIII支持而815系列主板不支持SMP,是佰钰自己搞出来的(52字) 四海一家 (101531)于2001/08/29(09:04:11)..
诚心请教:
如果PIII不支持SMP,主板改造后支持了,
那么是不是也支持被屏蔽了SMP的双CII?
谢谢!
- ◎ 铜矿支持的,具体要看cpu的stepping(空) 阿巧 (101544)于2001/08/29(09:48:26)..
- 以前看到PIII支持SMP,而CII的SMP功能被屏蔽掉了,不可能象老CY那样通过连接某个脚还能行。(22字) 四海一家 (101637)于2001/08/29(17:00:15)..
这么说新的CII是有可能支持SMP的了?
谢谢!
- 嗯?(139字) y2kdiyer (101781)于2001/08/29(21:59:06)..
PIII是支持SMP的!盒子上的说明和网站的说明都说PIII SMP吖!PIII整系列都支持!但个别PIII是不支持的!要看型号
BX板需要加芯片,芯片像I/O芯片
815EP理论是支持的,694DP(型号对么?)也支持SMP,那不支持PIII.还支持什么?370只有CE/CII/PIII/VIA c3而已!
另外CII是否PIII还是未知之数!
- 嗯!够水准,说得好(4字) 双CPU主板 (102276)于2001/08/31(11:21:16)..
纠出假的
- CII无论如何都不可能支持(11字) liliwan (101646)于2001/08/29(17:15:41)..
CII无论如何都不可能支持
- 呵呵,我并没有说CII支持SMP啊,别打我行吗??(37字) 四海一家 (101659)于2001/08/29(17:32:59)..
我是怕自己孤陋寡闻,不知道有新产品能通过其它途径让CII支持SMP了,想见识一下
- 具体点!ok?(空) 双CPU主板 (101552)于2001/08/29(10:44:58)..
- 反而找块旧菜羊倒是可以支持SMP。(空) 学者 (101293)于2001/08/28(15:55:06)..
- 我怎么越听越糊涂了(空) 双CPU主板 (102273)于2001/08/31(11:12:47)..
- ◎ 总之:PIII是支持SMP的!(空) y2kdiyer (102274)于2001/08/31(11:17:08)..
- 对了,谁有至强的CPU卖?(53字) 双CPU主板 (104216)于2001/09/06(12:04:05)..
对了,谁有至强的CPU卖?
对了,谁有至强的CPU卖?
对了,谁有至强的CPU卖?
对了,谁有至强的CPU卖?
本论坛由小熊在线(www.beareyes.com)joyt制作及维护